MAINHome
About Us
Contact Us
Info Links
Bargain Barn
Catalog
Home

   SPRAYINGSprayers
Controllers
GPS / Mapping
Foam Markers
Tender Carts
Tanks
Lawn/Utility
Parts

GRAINRem Vacs Wagons/Carts Auger/Conveyor Seed Tenders

FRUIT & VEG.Weeders
Cabbage Harvesters
Carrot Harvesters
Onion Equipment

OtherRock Pickers
Hay Equipment
Wireless Hydro
Mowers
Used

 

  

 Schulte Industries

Rock Removal Equipment

(Shown: Model 2500 Giant)

  • Large 2.5 cubic yard (1.9 M³ ) hopper.

  • Durable tapered T-iron grate with 1-1/2” (38mm) thick teeth eliminates jamming while allowing soil to sift through for clean rock picking.

  • Batt tubing has 3/8” thick walls.

  • Wrap around, hard surfaced batt teeth offer strength and wear resistance.

  • Large heavy wire springs hold batts firmly in position and cushion shock loads. Spring coil diameter is reduced at the ends to minimize the possibility of breaking the spring hooks.

  • Floating grate protects the machine from damage due to large immovable rocks.

  • Pivoting hitch pole allows the machine to be quickly moved from the offset picking
    position to a centered transport position.

  • Large 16.5L X 16.1 tires provide superior flotation

_______________________________________________________

(Shown: Model RS320 Jumbo)

  • RS320 features an extra large 3.2 cubic yard (2.43 m3) hopper for greatly increased rock removal efficiency. The RS320's hopper has twice the capacity of an average rock picker hopper.

  • The RS320's new T-iron tapered grate with 3/4” bottom and 1/2” top material virtually eliminates all small rock jamming. And the 48" grate which is 17" longer than most reel type rock pickers on the market picks 50% less dirt and trash than reel types because it allows more time to sift the soil out before the rock enters the bucket.

  • Large, flotation type, all weather 16.5L x 16.1 tires are mounted on high capacity eight bolt wheels and hubs.

  • The RS320 Rock Picker removes surface rock from 2 to 28 inches (50 to 700 mm) diameter

_______________________________________________________

(Shown: Model High Rise 8000)

  • Load trucks with ease!

  • Build larger stone piles!

  • Durable tapered T-iron grate with 1-1/2” (38mm) thick teeth eliminates jamming while allowing soil to sift through for clean rock picking.

  • Batt tubing has 3/8” thick walls with wrap around, hard surfaced batt teeth for greater strength and wear resistance.

  • Large, heavy wire springs hold batts firmly in position and cushion shock loads. Spring coil diameter is reduced at the ends to minimize the possibility of breaking the spring hooks.

  • Floating grate protects the machine from damage due to large immovable rocks.

  • Optional hydraulic pivoting hitch pole allows the machine to be quickly moved from the offset picking position to a centered transport position.

  • Large 16.5L X 16.1 10 ply tires provide superior flotation

_______________________________________________________

(Shown: Model SRW1400)

  • Transports at an ultra narrow width of 93” (2.36 M).

  • Windrows 2” to 25” rocks with ease, forming them into neat uniform rows.

  • Power is supplied to the windrower drum via a heavy duty PTO drive line which includes a slip clutch and shear bolt arrangement for protection against excessive shock loads.

  • The final drive chain is totally enclosed for longer service life.

  • The windrower drum is 14 feet (4.27 M) wide and is constructed of 8 5/8 inch (219mm) heavy wall HSS tube.

  • Hard surfaced, 5/8 inch (15.9mm) x 6 inch thick x 6 inch (152.4mm) long teeth are welded directly to the drum pipe, resulting in problem-free operation even in difficult conditions

 

 For more info, visit the Schulte website on the Info Links page. 

_______________________________________________________

NESSA Inc.

73747 130th Street

Zearing, Iowa 50278

Phone: (641) 487-7608     Fax: (641) 487-7606